Chicago Illinois Fishing Forum, Information & Reports - View Single Post - First rod Build Tips and Mistakes (and product review)
» CLF Sponsors
View Single Post
Old 03-03-2014, 07:18 PM   #7 (permalink)
Senior Member
Superfluke's Avatar
Join Date: Dec 1969
Posts: 1,803

Originally Posted by Richie Frye View Post
I assume you are using Flex Coat ?
You should also be using an alcohol lamp while applying the epoxy. Flex coat takes about two full minutes to mix and at about the 45 second mark you will notice it go from opaque to clear.
The lamp goes right under the wrap being epoxied and obviously the flow/viscosity of the epoxy changes when heated making it much easier to make nice thin coats which after a bit of practice should be a one and done type application.
I use a razor to cut the tag end of the wrap nice and close to the wraps.
Nice to see you again Ricardo....!

Superfluke is offline   Reply With Quote
Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 07:09 AM.

Powered by vBulletin® Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.